Thanks for the info Antus, thought one of vl400 units would be easier, but more curious to know if possible
Cheers

G'day, thread has been a great read, Had a though the other night also with regards to the northstar setup, Can two ignition modules (1927A's for instance) be used together to run a v8? if each has its own sensor mounted 90deg apart, with information sent to the 808 from only one but the ecu sending...

Thanks for the quick response and for the info :thumbup: Was looking at using for a water pump and possibly electric power steering pump due to charger taking up all the room, and also possibly fan speed control... possibilities seem endless. So it seems due to reliability issues, builders opt for a...

G'day, was after some information on the PWM driver that previously featured on here for use with flex tables, the link displayed: http://pcmhacking.net/forums/viewtopic.php?f=14&t=397 says is no longer availiable.
Does any one have a diagram/schematic of the driver i could get a look at?
Thanks.

Gday, an old post i know but maybe useful to someone down the track. Have reconstructed an rb30 supercharged (Vortec V2) setup several years ago, bough most of the stuff with the charger, but looms,injectors and stuff were missing (changed over from a wreck to another car) - didn't end up finishing,...

Thanks Antus, that makes more sense now.

Gday, Trying to get my head around a problem and have a couple questions. Im trying to identify a bin pulled (used Gq-4x) from a mates VN 355,which has an 808 ecu. When id'd comes up with File unknown, and a whole heap of stuff like: Detected MD5 11a7a710248bef1c6e36dde5a3f5534a IN AREA 0x6000 - 0x7...

Gday, The info on data logging i was following while trying to connect, found quite helpfull, the rs232 echo i tried both on and off, ill go through again to see what ive missed. Not got a eprom programmer yet, in the process of. Also as an afterthought, more for testing/attempting to read chip ect,...

Hi, Cheers for the quick responce, No cannot connect at all, says connecting but doesn't eventuate, i assume takes less than 5 minutes to connect? didn't think to try reading it with flash tool, my understanding was the vn eproms couldn't be read this way, as not flashed based, although when i looke...

Gday all, also having a connection issue, and after some advice. Have a usb internal comms board fitted in an 808 and installed drivers as recomended. Opened TP5 loaded adx and xdf files for data logging, with engine/ignition off, when testing the connection in "test for valid interface user se...