Will just out of interest here I've just done a VE table adjustment calucation two different ways. One using BLM's and the other using AFR from the same log. The AFR was worked out using Holden's 202 Spreed sheet was works on ratio between current and requested. The ratio is then multied by the curr...

https://pcmhacking.net/forums/view ... =10&t=1414 I think this thread may help look like BCM

have you selected the ADX file?

I'm hoping more of a poor spray pattern causing low efficency as currently going through fuel, one tank is gone in 350km. The other that I'm a little concerned about is the new fuel pump Isn't suppling the correct fuel pressure.

Notice what? That it is lean or the difference after changing the VE table. Not a great change Driving at this stage but only playing in only a small section of the Table. When i was in the Driveway hold a constant rpm/Throttle and changed the VE the RPM did increase without changing throttle positi...

WB In NB hole Engine running very lean at low rpm with low loads about 10% change in VE table was required to get ball park figures.

Here is the Log before i started playing.

And I have to agree with you on that as it showing on the log but at the same time should be able to give an idea of what is happening. The plan is to swap the NB with the WB this weekend and compare information to see if it is viable for future use or not.

Still sorting through the log trying to see anything strange But I've Attached some photos of the Tail pipe sniffer i was using due in the Log above. Yes it is home made but worked well on the celica.

oh should have added that the memcal has been replace with BWLS1281 program on a Mod memcal after finding out it was for a Getrag. Thinking it was still the same ECU as a T5 and all it was just be a matter of using the correct memcal program for a T5 but after reading http://www.kalmaker.com.au/phpb...

This is interesting the fact you have the same error my mate is getting (94) with a Manual ecu and a manual Memcal. Keep in mind yet to check over the wiring completely but the ecu he has is a 16250728 with a BZPT memcal which is listed as a Getrag box and not a T5 like he has installed. And from wh...