Hi Guys,
Was wandering if anybody could share a xdf for this bin. It is a Kalmaker w20. The owner has changed the manifold and I need to modify the fuel, spark and idle tables. I wish 11 code was ready but cant seem to get enough tuneability from the usual real time modded bin.
Thanks.
xdf required
xdf required
- Attachments
-
- stato.bin
- (64 KiB) Downloaded 181 times
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: xdf required
out of interest what isn't $11 doing that you require ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: xdf required
Its been a while since I did one of these and had it confused with an early 83A xdf which didn't have idle spark adj parameters and iac adj parameters, I'm now using 11b 1.03 and all good. So used to 12P would be good when 11P is ready.
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: xdf required
Have just uploaded a revised VR $11 XDF. There were a few incorrect calcs with the original one, grab V1.06 here .. https://pcmhacking.net/forums/viewtopic.php?f=7&t=5
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: xdf required
Just noticed when I compared to other files there's area's 8E00 (to 8EFD to be exact) onwards that aren't defined (in version 106 xdf $11B), does anyone know whats there?