$A5K DDRJ mod(real time) logging
Posted: Sat Jul 02, 2011 1:31 pm
I just tried logging my car with jayme's vx s/charged tp5 ver 101 adx with a real time DDRJ mod bin(& massive changes) & can't seem to get the right information out when logging?
I have the interface type set as use plug in, then using ose plugin v1.2.4 & have it set to the right com port & first tried with cable echo ticked, then seemed to connect better with it un ticked so left it like this. I have this set for both the acquisition & logging as well as I have it set as for emulation(don't think this will bother it though or whether it even needs it?). But none of the right information was coming out so I then went through all the adx's vt, vx(flash type), vy(flash type) but none of them read right!
The massive changes are basically every single difference from a late model auto trans file compared to a getrag file of the exact same release base!
I didn't know if changing everything would even work as I haven't identified a lot of the areas changed but the car actually runs & pretty well it just doesn't idle well, it hunts a fair bit & then when it's warm it idles at 2000 rpm & very slowly decays back down, but drives perfect!
So seeing as its pretty close to working I would love to log it & see if I can get it to idle right!
I have the interface type set as use plug in, then using ose plugin v1.2.4 & have it set to the right com port & first tried with cable echo ticked, then seemed to connect better with it un ticked so left it like this. I have this set for both the acquisition & logging as well as I have it set as for emulation(don't think this will bother it though or whether it even needs it?). But none of the right information was coming out so I then went through all the adx's vt, vx(flash type), vy(flash type) but none of them read right!
The massive changes are basically every single difference from a late model auto trans file compared to a getrag file of the exact same release base!
I didn't know if changing everything would even work as I haven't identified a lot of the areas changed but the car actually runs & pretty well it just doesn't idle well, it hunts a fair bit & then when it's warm it idles at 2000 rpm & very slowly decays back down, but drives perfect!
So seeing as its pretty close to working I would love to log it & see if I can get it to idle right!