Page 14 of 15
Re: 98 vt srs light
Posted: Sat Nov 10, 2012 3:58 pm
by VX L67 Getrag
Nice Work Antus,
I could have tried sending the info with my scan tool & captured if you did have further issues!
Re: 98 vt srs light
Posted: Thu Dec 13, 2012 3:35 pm
by dev8ed
antus wrote:Managed to trigger this warning on a VZ 6.0 this week. After some experimentation it turns out that the module is on FB (probably the same as a VY) and this command solved it. Sent wil vl400s flash tool. The module did not reply, but a dash reboot and the error was cleared.
FB,56,0A,A5
can confirm that this also works with a VX calais 3.8L
Re: 98 vt srs light
Posted: Sun Jan 19, 2014 11:22 pm
by vs ss
Hi all, I was just wondering if anyone had worked out the data to send to a vs srs to clear the code?
Cheers.
Re: 98 vt srs light
Posted: Mon Jan 20, 2014 11:25 am
by VL400
Try F2,56,A,AE
Not sure if the SRS is on the same ALDL bus in a VS though.
Re: 98 vt srs light
Posted: Mon Jan 20, 2014 11:28 am
by antus
Yeah I recall we decided that it was not the correct bus. there probably is a command that we havnt figured out that will cause the bcm to bridge the two busses, but I reckon if you find the wire where it goes in to the bcm and tap in your aldl connection there it'll work.
Re: 98 vt srs light
Posted: Tue Jan 21, 2014 1:01 am
by vs ss
Thanks guys for your help
I will make up an adapter to go between the aldl cable and the diagnostic port with it bridged and see if I can make something happen.
cheers.
Re: 98 vt srs light
Posted: Tue Jan 21, 2014 2:20 pm
by The1
SRS on VS is on seperate bus, tech1 can read it and clear codes etc, i havn't tried much yet in the way of piggybacking tech1 with laptop to see what's going on.
Re: 98 vt srs light
Posted: Tue Jan 21, 2014 2:32 pm
by antus
just for clarity i was referring to the aldl bus from the srs where it connects in to the bcm, not the main vehicle aldl bus.
Re: 98 vt srs light
Posted: Tue Jan 21, 2014 2:41 pm
by The1
pretty sure it's a full separate data link for VS, only VT up talked to other systems.
Re: 98 vt srs light
Posted: Tue Jan 21, 2014 4:07 pm
by VL400
Am still trying to find the wiring diagram but I seem to recall it being pin 1 of the data connector under the steering column for SRS data. The other ALDL data is pin 9.