VE Instrument Cluster EEPROM Programming
-
- Posts: 159
- Joined: Fri Aug 25, 2017 5:28 pm
- cars: liberty gen 5
- Location: Adelaide
Re: VE Instrument Cluster EEPROM Programming
hey guys
thanks for all the great info. ive got a cluster here that i've read the eeprom on, changed the values and written back to the chip.. now i just want to power it on the bench to have a look but im going in circles trying to work out how to power it up.
what pins need to be connected? it's an aussie VE series 1 - 8184-26140-04 mainboard
cheers!
thanks for all the great info. ive got a cluster here that i've read the eeprom on, changed the values and written back to the chip.. now i just want to power it on the bench to have a look but im going in circles trying to work out how to power it up.
what pins need to be connected? it's an aussie VE series 1 - 8184-26140-04 mainboard
cheers!
-
- Posts: 2
- Joined: Tue Nov 20, 2018 9:10 pm
- cars: CSV Strada Extreme
WH Statesman
VE SSV Utility
VY Utility
Re: VE Instrument Cluster EEPROM Programming
Here are a few VE Series 2 Cluster BIN files if anyone has a need for them.
Series 2 VDO / Continental BLACK back instrument clusters - It also "Appears" that some very late Series 1 VE's were fitted with the Black Back VDO / Continental Clusters.
All BIN files are as Downloaded from good working Clusters - The VIN numbers in the BINS have been deleted but the rest of the file is untouched.
ALL are programmed for 2012 VE SSV UTE , 6.0 Litre ( L77 LS3 ) , 6 Speed Manual ( TR6060 ) , Full Sat Nav ( All STD MY12.5 SSV Ute options )
Also as an FYI - Series 1 VE clusters when programmed with a Tech2 will work fine in a Series 2 VE , Only issue I've seen is with the Navigation Pop Ups in the Cluster the font's are not right in a Series 2 and size up funny and often with odd characters in the display - Other than that issue the Series 1 dash works fine in a Series 2 vehicle - I've used several Series 1 clusters in my car and all without any issues (AFTER they have been configured with a Tech 2 ) other than the NAV pop ups - If you don't have Sat Nav you won't see any issues.
Series 2 VDO / Continental BLACK back instrument clusters - It also "Appears" that some very late Series 1 VE's were fitted with the Black Back VDO / Continental Clusters.
All BIN files are as Downloaded from good working Clusters - The VIN numbers in the BINS have been deleted but the rest of the file is untouched.
ALL are programmed for 2012 VE SSV UTE , 6.0 Litre ( L77 LS3 ) , 6 Speed Manual ( TR6060 ) , Full Sat Nav ( All STD MY12.5 SSV Ute options )
Also as an FYI - Series 1 VE clusters when programmed with a Tech2 will work fine in a Series 2 VE , Only issue I've seen is with the Navigation Pop Ups in the Cluster the font's are not right in a Series 2 and size up funny and often with odd characters in the display - Other than that issue the Series 1 dash works fine in a Series 2 vehicle - I've used several Series 1 clusters in my car and all without any issues (AFTER they have been configured with a Tech 2 ) other than the NAV pop ups - If you don't have Sat Nav you won't see any issues.
- Attachments
-
- VE Calais Series 2 Dash_CONTROL_Munged_VIN.BIN
- (2 KiB) Downloaded 603 times
-
- VE SS Series 2 Dash_CONTROL_Munged_VIN_HighKs.BIN
- (2 KiB) Downloaded 555 times
-
- VE SSV Series 2 Ute Dash_CONTROL_Munged_VIN_LOW_Ks.BIN
- (2 KiB) Downloaded 584 times
- commodorenut
- Posts: 58
- Joined: Sun Jan 01, 2017 7:50 pm
- cars: VY Monaro 427ci SuperCharged
VK Group A LS2 671 Supercharged ( in the build )
Re: VE Instrument Cluster EEPROM Programming
Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any..
I have over 50 sedan ones, but no ute or wagon
I need to flash these onto a cluster so i can test my VE Canbus tool im making..
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any..
I have over 50 sedan ones, but no ute or wagon
I need to flash these onto a cluster so i can test my VE Canbus tool im making..
-
- Posts: 2
- Joined: Tue Nov 20, 2018 9:10 pm
- cars: CSV Strada Extreme
WH Statesman
VE SSV Utility
VY Utility
Re: VE Instrument Cluster EEPROM Programming
Let me know what Engine / Drive train Etc options you want on it and I'll program up a Series 1 dash in the car and I'll extract a bin file for you.commodorenut wrote:Hi Guys,
im chasing some VE Series 1 ( White back ) Cluster bin files from a ute and wagon.
Does anyone have any.. .
-
- Posts: 23
- Joined: Tue Nov 21, 2017 10:03 am
- cars: '06 VZ Thunder 6.0Ltr 6-Speed Ute
'94 VR S-Pack 3.8Ltr
'04 VZ Executive 3.6Ltr Wagon
'89 VN 3.8Ltr 5-Speed Sedan
Re: VE Instrument Cluster EEPROM Programming
I know its a bit of an older thread but i whipped up a quick app that will convert your decimal odometer reading to the hex value you require based on ZerOne's Calculations.
- Attachments
-
- VE_OdoCalc.zip
- (81.09 KiB) Downloaded 669 times
Re: VE Instrument Cluster EEPROM Programming
In all of the series 1 clusters that i've read, The value has been a division of 12.375
eg.
307700/12.375=24864.65
24865 dec2Hex => x06121
307700km
x06121
273301km
x05645
232792km
x0497c
79296km
x01908
- x07fff seems to follow odd numbers only
- calculator wont do over 300132km
eg.
307700/12.375=24864.65
24865 dec2Hex => x06121
307700km
x06121
273301km
x05645
232792km
x0497c
79296km
x01908
- x07fff seems to follow odd numbers only
- calculator wont do over 300132km
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
- Tre-Cool
- Posts: 326
- Joined: Tue Oct 16, 2012 12:17 pm
- cars: VY SS UTE, VX Drag Car
- Location: Perth
- Contact:
Re: VE Instrument Cluster EEPROM Programming
Rather then strip my dash just to get the wiring colours, does anyone have the pin location for earth/power so i can power up my old dash cluster to check the km's?
Re: VE Instrument Cluster EEPROM Programming
Ve series 2 odometer locations
x0008 - x0027
x00d4 - x00d5
x0008 - x0027
x00d4 - x00d5
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: VE Instrument Cluster EEPROM Programming
Hi all has anyone been able to get Raksau VE OdoCalc to work i have no luck on win8 or win xp
Many Thanks
Many Thanks