Re: VT $A5 V6 Definition Info
Posted: Sun Oct 04, 2009 7:26 pm
yeah forgot about that table. VS bins dont have the correction table...
pcmhacking.net
Electronic Fuel Injection - Developement & Tuning
https://pcmhacking.net/forums/
VT $A5 V6 Definition Info
Page 3 of 6
Re: VT $A5 V6 Definition Info
Posted: Sun Oct 04, 2009 7:44 pm
they do just the xdf doesnt show it
Re: VT $A5 V6 Definition Info
Posted: Sun Oct 04, 2009 7:57 pm
i've looked for it before in the VS bin, couldnt find it. I saw on the kalmaker site that the VS didnt have it from factory so they added it in so i stopped looking lol 
Re: VT $A5 V6 Definition Info
Posted: Sat Oct 10, 2009 7:26 pm
maybe thats why i cant find it LOL.anyone found the auto trans error codes in the VT V6 SC bins yet need to make a manual bin
Re: VT $A5 V6 Definition Info
Posted: Sun Oct 11, 2009 7:47 am
get a manual bin thats the same type & swap the entire trans segent over into the SC bin, delete the EGR malf & youre done, much better than deleting malfs etc.
also its a bit more complex than masking malfs, theres 4 flags in all to deal with, KKMASK (enable malf processing), KKKMASK ( CEL enable), KKACT (action taken) & KKSEL (alternate action taken)
then you can also change the action taken specifics for most malfs.
Rob
also its a bit more complex than masking malfs, theres 4 flags in all to deal with, KKMASK (enable malf processing), KKKMASK ( CEL enable), KKACT (action taken) & KKSEL (alternate action taken)
then you can also change the action taken specifics for most malfs.
Rob
Re: VT $A5 V6 Definition Info
Posted: Sun Oct 11, 2009 11:09 pm
cheers rob did you find the scannerpro download www.scannerpro.net is the best place but now Tunerpro V5 has it in your best to use that and make adx's to suit
Re: VT $A5 V6 Definition Info
Posted: Wed Oct 28, 2009 8:20 pm
Have updated the Variant F file.
Replaced LV8 with mg/cylinder based on feedback and what is in the ALDL data stream.
Updated MAF tables and constants, for those of you who know what your doing this should make sense, otherwise have a look at the MAF info thread before asking questions.
Added base injector rate, and idle speed tables Vs coolant.
Added max upshift downshift constants.
If anybody has any additional info PM me and I'll add it in.
Happy tuning
Replaced LV8 with mg/cylinder based on feedback and what is in the ALDL data stream.
Updated MAF tables and constants, for those of you who know what your doing this should make sense, otherwise have a look at the MAF info thread before asking questions.
Added base injector rate, and idle speed tables Vs coolant.
Added max upshift downshift constants.
If anybody has any additional info PM me and I'll add it in.
Happy tuning
Re: VT $A5 V6 Definition Info
Posted: Thu Dec 10, 2009 3:46 pm
Updated Variant F xdf to V1.5. Now includes some additional flags, constants and tables.
NOTE: Has been updated to TP RT5, will not work with TunerPro V4 !!!!
Would appreciate if people can PM me any other info they may have that can be added.
yoda69
NOTE: Has been updated to TP RT5, will not work with TunerPro V4 !!!!
Would appreciate if people can PM me any other info they may have that can be added.
yoda69
Re: VT $A5 V6 Definition Info
Posted: Thu Jan 21, 2010 2:43 pm
Updated Variant F xdf to V1.6.
AFR table had axis reversed, has now been corrected.
NOTE: Has been updated to TP RT5, will not work with TunerPro V4 !!!!
Would appreciate if people can PM me any other info they may have that can be added.
yoda69
AFR table had axis reversed, has now been corrected.
NOTE: Has been updated to TP RT5, will not work with TunerPro V4 !!!!
Would appreciate if people can PM me any other info they may have that can be added.
yoda69
Re: VT $A5 V6 Definition Info
Posted: Thu Jan 21, 2010 3:13 pm
in my experience, TP5 has completely reversed some tables on me when saving a bin (other people have reported this too) I wouldnt be using it to tune anything just yet.