FS: Universal knock filter module
Posted: Tue May 21, 2013 10:12 pm
- knock_module.jpg (104.42 KiB) Viewed 4538 times
- knock_gui.png (35.18 KiB) Viewed 4538 times
Description: Programmable knock filter module, can be used with an 808 instead of a knock filter on the memcal (connect via pin B7) or any other ECU that accepts a knock input, or as a visual indicator with a LED. It will work with an OEM knock sensor, or a generic flat response sensor.
Two knock sensors can be connected for V/boxer engines etc.
See https://pcmhacking.net/forums/viewtopi ... =11&t=1820 for more information.
Cost: $80 assembled (plus postage)
Ordering Information: PM me