Gm Seed key algorithms
Re: Gm Seed key algorithms
so with rolling seed/key, does the seed roll as well or just the key? On the E 41 I have, After programming it, the seed did not change, I haven't been able to test to see if the key changed after.
also, don't some ECU's lock out after multiple failed key attempts, causing the auto generate method to take even longer?
Thanks for the discussion, I find this stuff all very interesting. I have no real plans to try and do anything with the info.
also, don't some ECU's lock out after multiple failed key attempts, causing the auto generate method to take even longer?
Thanks for the discussion, I find this stuff all very interesting. I have no real plans to try and do anything with the info.
Re: Gm Seed key algorithms
Both seed/key are rolling. Meaning the calculation is taking place inside the ECUs firmware. So attacking the ECU firmware SHOULD be the go to, but because the microcontrollers are locked down, you cant get into the juicy stuff to even reverse them.gmtech825 wrote:so with rolling seed/key, does the seed roll as well or just the key? On the E 41 I have, After programming it, the seed did not change, I haven't been able to test to see if the key changed after.
also, don't some ECU's lock out after multiple failed key attempts, causing the auto generate method to take even longer?
Thanks for the discussion, I find this stuff all very interesting. I have no real plans to try and do anything with the info.
ECUs like E41 use the single 5byte seed/key.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Re: Gm Seed key algorithms
Ve Series 2
EHU:
GM_Other
ALGO: 0B
EHU:
GM_Other
ALGO: 0B
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
-
- Posts: 590
- Joined: Thu Feb 13, 2020 11:32 pm
- cars: Mainly GM trucks, a Cruze and an Equinox for dailys..
Re: Gm Seed key algorithms
Seed: 1234
Algorithm: 0b
GM other selected
Step : tempseed1 = seed << 0x2
Step : tempseed2 = seed >> 0xE
Step : seed = (tempseed1 | tempseed2)
Step : seed += 0xB6B6
Step : Byte Swap Seed
Step : seed-= 0xFDDA
Seed: 0x1234 Key: 0x8925 Algorithm: 0xB
This look good to anyone else??? Do we have known good seed/key combos to test with??
Algorithm: 0b
GM other selected
Step : tempseed1 = seed << 0x2
Step : tempseed2 = seed >> 0xE
Step : seed = (tempseed1 | tempseed2)
Step : seed += 0xB6B6
Step : Byte Swap Seed
Step : seed-= 0xFDDA
Seed: 0x1234 Key: 0x8925 Algorithm: 0xB
This look good to anyone else??? Do we have known good seed/key combos to test with??
Re: Gm Seed key algorithms
I meant
If you want to put a Series 2 IQ EHU In
Unlock with Algo 0b from GM_Other
Then write lower 8 VIN with ID 28
If you want to put a Series 2 IQ EHU In
Unlock with Algo 0b from GM_Other
Then write lower 8 VIN with ID 28
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Gm Seed key algorithms
GMLAN
E77
ALGO: 0B
VE BCM
ALGO: 7C
E77
ALGO: 0B
VE BCM
ALGO: 7C
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Gm Seed key algorithms
This is from a Barina XC or Corsa C with E55 type ecu if it helps. Class 2 algo Bironduke wrote:Seed: 1234
Algorithm: 0b
GM other selected
Step : tempseed1 = seed << 0x2
Step : tempseed2 = seed >> 0xE
Step : seed = (tempseed1 | tempseed2)
Step : seed += 0xB6B6
Step : Byte Swap Seed
Step : seed-= 0xFDDA
Seed: 0x1234 Key: 0x8925 Algorithm: 0xB
This look good to anyone else??? Do we have known good seed/key combos to test with??
60 36 seed
41 78 key
94 60
95 E0
Re: Gm Seed key algorithms
E86
Gm_other
Algo 02
Gm_other
Algo 02
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Gm Seed key algorithms
I don't really do much of this stuff now days but perhaps someone will find a use for it. I got bored over my holidays and ticked it off my "I'll do that one day" list:
https://github.com/jezzab/GMSeedKey
I've seen some similar things but they were outdated and with the current tables, missing opcodes and did some very wild bitshifting that wasn't necessary.
https://github.com/jezzab/GMSeedKey
I've seen some similar things but they were outdated and with the current tables, missing opcodes and did some very wild bitshifting that wasn't necessary.
-
- Posts: 2886
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Gm Seed key algorithms
Does anyone know what the EFI-Live COS3 key should be for an LS1 controller with seed of 5FC0 it's not D2EE