Guessing plugs on loom
-
- Posts: 591
- Joined: Thu Nov 03, 2011 7:57 pm
- cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1 - Location: perth wa
Re: Guessing plugs on loom
1st pic looks like the ecu coolant temp plug
Re: Guessing plugs on loom
[quote="vs ss"]1st pic looks like the ecu coolant temp plug[/quote]
Coolant temp would be the blue one wouldn’t it?
Coolant temp would be the blue one wouldn’t it?
-
- Posts: 591
- Joined: Thu Nov 03, 2011 7:57 pm
- cars: hsv enhanced vs ss
vt xu6
fb holden
toyota landcruiser
vt ss s1 - Location: perth wa
Re: Guessing plugs on loom
Oh yeah, sorry. It’s been along time since I played with these and had a brain moment.
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Guessing plugs on loom
Try leaving it not connected and see how you go. It sounds like the green one probably is AC as there is no AC on the diagrams you post. The white one is also likely not critical and if you key on and it doesnt work whats not working might give you a clue. The diagrams seem to cover bare minimum wiring, you probably need factory wiring diagrams to see the ancillary connections.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- antus
- Site Admin
- Posts: 8261
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Guessing plugs on loom
According to this, assuming '12' is the 6 pin connector, I can count for the other 5 pins from what you've posted, and the remaining one is S R (grey/violet) and goes to the TCC. Those colours a bit faded might be what you're looking at.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Guessing plugs on loom
I was using this one to find out the wire colours.
- Attachments
-
- 0EDF3F89-F666-4D53-BA02-34F2D1FEBDAB.jpeg (451.17 KiB) Viewed 4841 times
-
- Posts: 471
- Joined: Thu May 03, 2012 10:50 pm
- cars: HZ One Tonner
VE Ute - Location: Castlemaine, Vic
Re: Guessing plugs on loom
I'm not sure what the injector type plug is but would love to know if you ever work it out.
It wasn't in any of the looms I've done or I would of added it to the diagram.
Cheers
It wasn't in any of the looms I've done or I would of added it to the diagram.
Cheers
-
- Posts: 1837
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: Guessing plugs on loom
Maybe put a multimeter on it and find out what ECU terminals it connets to.
Re: Guessing plugs on loom
So the extra plug ended up being the alternator plug, not listed in the schematic but the person who removed the loom said it was plugged into the alternator and it is the right plug for it.
Re: Guessing plugs on loom
Doesn’t go to the ecu, just to body control plug.Charlescrown wrote:Maybe put a multimeter on it and find out what ECU terminals it connets to.