Holden VR or VS error code checking procedure via aldl
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Holden VR or VS error code checking procedure via aldl
Hi
Curious of how to check for errors via aldl, tunerpro and laptop.
How to check, and how to clear please.
Cheers
Pete
Curious of how to check for errors via aldl, tunerpro and laptop.
How to check, and how to clear please.
Cheers
Pete
- vlad01
- Posts: 7820
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Holden VR or VS error code checking procedure via aldl
On the dash window you can add a lists tab by toggling lists from the top row of icons on the main program window. This will give you a list in the dash window on another tab like those the histogram and graphs are in.
I think there is a drop down above the lists that allows you to select different commands like, clear DTC, toggle fan, TCC etc.
I think there is a drop down above the lists that allows you to select different commands like, clear DTC, toggle fan, TCC etc.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
Hi Vlad,
Cheers for the reply.
Can I do this disconnected from the car, until I find the menus you mention.
I understand I then need to connect to look at or clear any error codes.
Thanks
Pete
Cheers for the reply.
Can I do this disconnected from the car, until I find the menus you mention.
I understand I then need to connect to look at or clear any error codes.
Thanks
Pete
- vlad01
- Posts: 7820
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Holden VR or VS error code checking procedure via aldl
Yes you can, I just checked and the list is there but I don't see the command option anywhere but it might be coz my desktop TP copy has never been connected to a car and that might need connection? or perhaps I never loaded all the plugins etc?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
I'm not 100% sure 9n the plug-ins, but from what I've learnt on here prior, people mention plug-ins for specific things.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
This sounds interesting. Instead of an actual scan tool.vlad01 wrote:On the dash window you can add a lists tab by toggling lists from the top row of icons on the main program window. This will give you a list in the dash window on another tab like those the histogram and graphs are in.
I think there is a drop down above the lists that allows you to select different commands like, clear DTC, toggle fan, TCC etc.
- vlad01
- Posts: 7820
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Holden VR or VS error code checking procedure via aldl
Yeah I never used a scan tool, only ever used the paper clip trick and TP.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
It would be pretty cool if you could do the abs brake bleed also, if we had to.
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
Hi
I'm just having a look at tunerpro not pluged into the car yet. trying to figure out this error code process.
i am able to bring up the data list views yellow button tab, then under lists, choose error code data only.
Im unsure if this is what im after?
If it is, what to do next, other than plug it into the car.
cheers
I'm just having a look at tunerpro not pluged into the car yet. trying to figure out this error code process.
i am able to bring up the data list views yellow button tab, then under lists, choose error code data only.
Im unsure if this is what im after?
If it is, what to do next, other than plug it into the car.
cheers
-
- Posts: 246
- Joined: Mon Aug 19, 2019 12:32 pm
- cars: 1994 VR v6 berlina
1996 VS v6 executive - Location: Christchurch, NZ
Re: Holden VR or VS error code checking procedure via aldl
Hi
been plugged into the car recently and with choosing the Error Code Data Only screen, i did see 2 errors i had created by working on the car.
Can i clear the codes via Tunerpro RT it self? Or do i have to pull the engine fuse, or disconnect the earth lead, which ever i choose at the time.
Cheers
been plugged into the car recently and with choosing the Error Code Data Only screen, i did see 2 errors i had created by working on the car.
Can i clear the codes via Tunerpro RT it self? Or do i have to pull the engine fuse, or disconnect the earth lead, which ever i choose at the time.
Cheers