Holden VF Cruze Colorado Software
Re: Holden VF / Colorado / Cruze BCM, IPC and Mylink Reset
Cruze VF Reset demo V0.03
Added VF and colorado to bin file editor.
Added VF and colorado to bin file editor.
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
- FriskyDingo
- Posts: 45
- Joined: Wed May 19, 2021 6:11 am
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Is it possible to save the bin from the bcm?
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
Yes but without a kernel you are limited to 0x10 bytes at a time
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
That hurts.mattyjf01 wrote:Yes but without a kernel you are limited to 0x10 bytes at a time
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
- Gatecrasher
- Posts: 278
- Joined: Sat Apr 25, 2020 6:09 am
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
From what I've seen on other modules, certain memory regions are locked out of read requests even if you've got security access.
There's a paid tool that can dump them relatively cheaply, but I'm not sending money to that particular country right now.
What does the reset function accomplish? I've got an acquaintance who might be needing a BCM swap soon.
There's a paid tool that can dump them relatively cheaply, but I'm not sending money to that particular country right now.
What does the reset function accomplish? I've got an acquaintance who might be needing a BCM swap soon.
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
I use to eeprom copy the bcm. Till I corrupted 2 eeproms (which turned out to be a faulty clip).
I had to pay for 2 vins both times(1 just to reset the sh bcm).
I've had ioterminal for awhile (just gm ecu)
So I purchased gm bcm and Siemens to do the simtec 76
It's a good tool
I had to pay for 2 vins both times(1 just to reset the sh bcm).
I've had ioterminal for awhile (just gm ecu)
So I purchased gm bcm and Siemens to do the simtec 76
It's a good tool
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
V0.04
- Added Cruze read code support for Simtec 76.1 and E78
- Added Cruze read code support for Simtec 76.1 and E78
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Holden VF / Cruze BCM, IPC, Mylink Reset and odo correct
V0.05
Added Cruze Steering column lock control module
- Link, Reset, Link info, VIN read and write
Added Cruze Steering column lock control module
- Link, Reset, Link info, VIN read and write
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Holden VF Cruze Colorado Software
V0.06
Added Support for E39A and E98
Added Support for E39A and E98
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
Re: Holden VF Cruze Colorado Software
V0.07
Added Eeprom clone for E39A, E67, E98, SIM76.1 and E78
Added Eeprom clone for E39A, E67, E98, SIM76.1 and E78
Fermec Software
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203
For full versions email mattyjf01@hotmail.com
https://www.facebook.com/profile.php?id=100057603993203